• Hotline: (+84) 24 3831 7433
  • Email: amesco@amescovn.com
  • Customer reviews

    Video

    Installation products

    Installation products

    Installation products

    INSTALLATION PRODUCTS Include: Carbide Tipped Spot Facing Installation Kit: The carbide tipped spot facing installation kit includes all the necessary tools needed to accurately mount a vibration sensor onto the rotating machine. The packaged kit includes; tapping drill, taps, tap wrench and a spot facing tool, all presented in a compact portable box. There are three […]

    CONTACT US


    • Details

    INSTALLATION PRODUCTS

    Include:

    Carbide Tipped Spot Facing Installation Kit: The carbide tipped spot facing installation kit includes all the necessary tools needed to accurately mount a vibration sensor onto the rotating machine. The packaged kit includes; tapping drill, taps, tap wrench and a spot facing tool, all presented in a compact portable box. There are three versions of the kit available to allow for different mounting threads; ¼, M6 and M8.

    Carbide Tipped Spot Face Tool: Carbide Tipped Spot Face Tool for for 1/4″-28 UNF Tapping.

    Stud Mounting Adhesive:

    • 2 part adhesive
    • Quick cure
    • Maximum temperature 100°C
    • Typical tube will stick 25 studs

    Sensor Checking Unit: The HS-660 is a NEW portable tool designed with the maintenance engineer in mind. The simple-to-use instrument performs the task of checking industrial accelerometers before and after installation. It confirms the bias level of vibration sensors and checks cable integrity, highlighting any electronic fault or cable damage.

    Accelerometer Simulator:  The HS-661 Accelerometer Simulator is a battery-powered, hand-held unit designed to enable installation engineers to test vibration monitoring systems that employ 100mV/g constant current type industrial accelerometers. The unit provides two switched levels of simulated vibration velocity signals, 5mm/s and 20mm/s, allowing verification of vibration monitor and alarm circuits.

    Crimping Kit for 2 Pin MS Connector: The HS-AA122 Crimping Kit enables installation for on-site connectors. The tools in this kit enable installers to cut, strip and crimp HS-AA rubber boot crimping connectors on-site.

     

    https://www.hansfordsensors.com/products/installation-products/

    Products of the same type

    Gọi điện SMS Chỉ Đường